The iTaste MVP3 is the newest in the line of internationally bestselling iTaste MVP vaporizers. The iTaste MVP3 features a greater range of Variable Voltage, Variable Wattage, advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology.
The iTaste MVP3 has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB charging cable.
The iTaste MVP3 has a variable voltage range of 3.0 – 9.0 volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 – 30.0 Watts, adjustable in 0.5 watts increments.
The iTaste MVP3 uses vRMS DC current and is very accurate with a power deviation of 0.1 Watt. The full 30Watts is precisely maintained between resistances of 0.4 to 2.5 ohms. There is no wasted power and exact accuracy means you are always vaping the power level that you choose. vRMS provides superior precision in delivering the exact wattage Ohm’s Law requires and stable power means better vapor.
- Variable Voltage: Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments.
- Variable Wattage: Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.
- Low Voltage Warning: The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off.
- Short Circuit/Atomizer Protection: Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.
- Remembers last Voltage or Wattage setting: When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on.
- Portable power source for electronic products: To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.
- High compatibility 510 connector: The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M.
- 1 x iTaste MVP3.0 Variable Voltage / Wattage battery
- 1 x charging cable
- 1 x 510 to 510/eGo Adapter
- 1 x Instruction Manual
- 1 x Gift Box
|UK Power Adaptor||No|
|Dimensions (approx)||10.2cm (height) x 4.6cm (width) x 2.3cm (depth)|
Be the first to review this product
Write Your Own Review
Registered Name: Vape Choice Limited | VAT No.: GB235677090 |Company No.: 09186932 | Registered Address: 140 Kenmore Avenue, Harrow, HA3 8PP