Innokin CoolFire IV TC100 boasts a 3300mAh battery capable of 100watts. That’s a massive battery capable of all the temperature you could want. With its UltraFast response of 0.2 Sec this pocket size Mod is a must have for any serious vaper.
With its quick charge ability (2Amp) this powerful Mod will allow you to use either Stainless Steel, Ni200 or Titanium coils to produce the massive vapours and enjoy intense flavours.
A must have for any serious vaper!
- Real long lasting internal 3300mAh battery
- 0.5 – 100W Temperature Control
- Complete range of T.C. Modes (SS, Ni200, Ti)
- Total T.C. Dry Hit Prevention & Quick Calibration
- UltraFast response: .2 seconds from Click to Vapour
- High quality stainless steel 510 threading
- 2AMP microUSB Quick Charge
- 1 x Coolfire IV TC100 Battery 3300Mah
- 1 x Micro USB Cable
- 1 x User Manual
Important information about Sub-Ohm vaping:
Vaporisers designed for sub-ohm vaping require more vaping experience, and extra care should be taken to ensure the correct atomiser and liquid strength is used. Note sub ohm coils will only work on a mod capable of firing sub ohm atomisers. Kindly ensure that your batteries can handle the extra power requirements, and that it is set to correct settings.
It is also advisable not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and once more extra care should be taken.
|Bottom Fill Tank||No|
|Top Fill Tank||No|
Frequently Bought Together
Alternative Products To Consider
2 customer reviews
Powerful with lots of room to experiment
Been trying different settings since getting this baby. With lots of temperature settings, wattage settings and its ability to detect the coils is perfect for me. Just get it but make sure to adjust the settings.
Perfect for beginners in temperature controlled vaping
This Mod is the perfect set up for both beginners and for those who are experienced, but still want practicality and mobility.
Firstly, this mod is blessed (in my personal opinion) with a built in battery coupled with micro-usb charging. Factor in that you can vape off this whilst charging, you then have an amazing mod for those chain vapers who forget to keep an eye on their charge. The battery life on this mod is also impressive, with a 3300mAh internal battery, which will last a whole day with even the heaviest of users. The battery life is also aided by the fast charger that is provided (only the usb cable comes in the box, you will need to have your own plug adapter, which you all should) and you can have this charged from 0% to 100% in about 90 minutes (from experience). The mod also uses a flashing led to warn you of the general battery charge available (green for full/nearly full, orange for somewhere in the middle, red for you need to charge now).
The mod itself is also easy to navigate, with a few simple patterns to remember (given that there are only three buttons). The mod will detect that you have screwed in a new tank and ask you to choose the appropriate setting. This mod will accept Nickel, Titanium, Stainless Steel and Kanthal coils, with only the latter not being able to use the temperature control option. Screw in your coil and select the type of coil and you can choose the temperature you want to vape at (displayed in degrees farenheit which round robins to degrees celcius). You can also change the ramp up wattage (the coil is fired at this wattage until it reaches temperature - the higher the wattage, the quicker it reaches temperature). The mod itself does not get hot at all and this is probably due in part to the ventilation provided on one side. If all else fails, you can simplu vape with the Variable Wattage mode using a Stainless Steel or Kanthal coil.
All in all an excellent device for novices and the more experienced. In my experience, this mod works best with either the iSub Vortex sub-ohm tank (as recommended on the box) or the Sense Herakles V2. Looks great too in all those colours!